Door Finger Guard Inspection Guide
Use this practical inspection guide to identify wear, damage, loose fixings and gaps in door finger protection.
Look
Check the guard, fixings, surrounding frame and accessible gaps for visible deterioration.
Operate
Move the door slowly through its normal range and observe how the protection behaves.
Record
Log the location, condition, action required, responsible person and completion date.
What to inspect
- Loose, missing or unsuitable fixings.
- Splits, punctures, tearing, brittleness or distortion.
- Sections pulling away from the door or frame.
- Sharp edges or damaged surrounding surfaces.
- Newly exposed gaps at any point in the opening cycle.
- Interference with the door closer, latch, seals or normal operation.
- Dirt or debris that prevents a proper visual check.
Simple condition rating
| Rating | Condition | Suggested action |
|---|---|---|
| Good | Secure, undamaged and operating correctly. | Record and continue routine checks. |
| Monitor | Minor wear with no exposed gap or loss of function. | Increase monitoring and plan remedial work. |
| Action required | Loose, damaged, detached, obstructive or no longer fit for purpose. | Restrict exposure where necessary and arrange prompt repair or replacement. |
How often should checks be completed?
There is no single interval suitable for every site. Set the frequency according to traffic, user vulnerability, previous defects, door condition and local risk-assessment arrangements. Add checks after building work, door repairs, impact damage or reported concerns.
Related resources
Need help choosing suitable door protection?
Compare the two products online or contact the Fingershield team for practical guidance based on the door, environment and level of use.
